GENUINE SUZUKI ACCESSORIES
9/17
5. Before cement is dried, spray
the degreasing detergent to the
inside of the Grip Heater (L) 4
and to the handlebars, then,
insert the grip. Slide Grip
Heater (L) 4 onto handlebar
with the lead wire pointing
down.
Handlebar
Grip Heater (L)
NOTICE
• When the grip is inserted,
do not stop in midway but
insert it at a stroke.
• When inserting it, do not hit
the grip end with a hammer
or twist it forcibly, the grip
heater may be cut off.
• When the grip cannot be
inserted in midway, pull out
the grip by pouring the
degreasing agent into a gap
between the grip heater and
the handlebar. At this time,
do not twist forcibly the
heater wire with a screw-
driver or such similar tool,
the heater wire inside the
grip heater may be cut off.
Grip Heater (L)
UP
Grip Heater (L)
FWD
Lead wire
To Next Page
Loading...
