Wheels and Tires: 2D-7
4) Tighten the rear axle nut (3) to the specified torque.
Tightening torque
Rear axle nut (a): 100 N·m (10.0 kgf-m, 72.5 lbf-
ft)
WARNING
!
After remounting the rear wheel, pump the
brake pedal several times to check for proper
brake operation.
5) Install the rear wheel speed sensor mounting bolts.
Refer to “Rear Wheel Speed Sensor Removal and
Installation in Section 4E in related manual”.
6) Check the clearance between the rear wheel speed
sensor. Refer to “Rear Wheel Speed Sensor
Removal and Installation in Section 4E in related
manual”.
Specifications
Tightening Torque Specifications
B917H22407002
NOTE
The specified tightening torque is described in the following.
“Front Wheel Components (GSX650FAK9) (Page 2D-2)”
“Front Wheel Assembly Construction (GSX650FAK9) (Page 2D-3)”
“Rear Wheel Components (GSX650FAK9) (Page 2D-4)”
“Rear Wheel Assembly Construction (GSX650FAK9) (Page 2D-5)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C in
related manual”.
(a)
3
I917H2240019-01
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Rear axle nut 100 10.0 72.5 )(Page 2D-7)
To Next Page
Loading...
Need help?
General
