2-23
FRONT BRAKE LEVER 2
The front brake is applied by squeezing the
brake lever gently toward the throttle grip.
This motorcycle is equipped with disk brake
system and excessive pressure is not
required to slow the machine down properly.
The brake light will come on when the lever
is squeezed inward.
Front brake lever adjustment
The distance between the throttle grip and
the front brake lever is adjustable to 5 posi-
tions. To change the position, push the
brake lever forward and turn the adjuster to
the desired position. When changing the
brake lever position, always be sure the
adjuster stops in the proper position; a pro-
jection of the brake lever pivot should fit into
the depression of the adjuster. This motor-
cycle is delivered from the factory with its
adjuster set to position 3.
WARNING
Adjusting the front brake lever position
while riding can be hazardous. Remov-
ing a hand from the handlebars can
reduce your ability to control the motor-
cycle.
Never adjust the front brake lever posi-
tion while riding. Keep both hands on
the handlebars.
To Next Page
Loading...
