Suzuki k8 gsx1300r - Warranty Claims and Reimbursement; Short Form Claim Instructions; Long Form Claim Instructions

Hayabusa-Zone.com
Bikeland.org
- 9/12-
WARRANTY REIMBURSEMENT & CLAIM INFORMATION:
Submit a warranty claim for each recall campaign service immediately upon completion of
the repair. This campaign requires you to file a warranty claim using the following information.
Short Form Claim:
Use the Short Form Claim for new, and customer owned units that require ignition switch lead
wire inspection and/or re-routing. Labor time is 0.3 hours.
Long Form Claim:
Use the Long Form Claim for customer owned units requiring ignition switch assembly
replacement or for units with additional time or parts required as approved by Tech-Line. Labor
time is 1.3 hours.
Suzuki Connect Long Form warranty claim entries
with additional parts or labor require
a prior
authorization (PAS) code from TECH-LINE or your Technical Service Manager, or the Suzuki
Connect system will not accept the claim.
RECALL CAMPAIGN
IGNITION SWITCH LEAD WIRE INSPECTION, REROUTE
Short Form Instructions
GENERAL
CLAIM NUMBER: XXXXX,X (Dealer enters number)
ENTRY TYPE: Model, Frame or Control Sequence
(Dealer Chooses)
MODEL: GSX1300RK8
FRAME: X821XXXXX
REPAIR DATE: Enter date of repair
MILEAGE: Enter mileage on unit
CAMPAIGN NUMBER: 2A05
RECALL CAMPAIGN
IGNITION SWITCH LEAD WIRE INSPECTION AND REPLACEMENT
Long Form Instructions
GENERAL
CLAIM NUMBER: XXXXX,X (Dealer enters number)
ENTRY TYPE: Model, Frame or Control Sequence
(Dealer Chooses)
MODEL: GSX1300RK8
FRAME: X821XXXXX
REPAIR DATE: Enter date of repair
MILEAGE: Enter mileage on unit
CAMPAIGN NUMBER: 2A05
LABOR HOURS: 1.3 hrs
PARTS
REPLACEMENT PART NUMBER: 99103-11237 QTY: 1
FAILURE DESCRIPTION
DESCRIPTION OF FAILURE: Replace Ignition Switch Assembly per
Service Bulletin GS-GSX-GSXR-GSF 183
SUBLET
SUBLET AMOUNT: as approved by TECH-LINE
NOTE: Do not use the "$" when entering an amount
SUBLET REFERENCE NUMBER: 2A05
SUBLET REPAIR DESCRIPTION: