SV650K7/SK7/AK7/SAK7 (’07-MODEL) 31
“C23” (P1651-H/L) TO SENSOR CIRCUIT MALFUNCTION
On model K7, the connector terminals to be used for checking
sensors for voltage, resistance or continuity at the ECM terminal
are located as shown in the illustration.
* Refer to the SV650/S service manual 4-35 for details.
“C24” (P0351) or “C25” (P0352) IGNITION SYSTEM MALFUNCTION
(When indicating C24/P0351 for IG coil #1)
(When indicating C25/P0352 for IG coil #2)
* Refer to the IGNITION SYSTEM for details. (#Page 66)
ECM coupler (Harness side)
SAMPLE
To Next Page
Loading...
