Need help?Do you have a question about the Suzuki SV1000 and is the answer not in the manual?
General| Manufacturer | Suzuki |
|---|---|
| Displacement | 996 cc |
| Compression Ratio | 11.3:1 |
| Fuel System | Fuel injection |
| Ignition | Digital/transistorized |
| Lubrication | Wet sump |
| Cooling System | Liquid-cooled |
| Clutch | Wet, multi-plate |
| Final Drive | Chain |
| Front Suspension | Inverted telescopic, coil spring, oil damped |
| Front Brakes | Dual hydraulic disc |
| Rear Brakes | Single hydraulic disc |
| Front Tire | 120/70-ZR17 |
| Rear Tire | 180/55-ZR17 |
| Ground Clearance | 140 mm (5.5 in) |
| Production | 2003–2007 |
| Engine Type | 4-stroke, 90° V-twin, DOHC |
| Bore x Stroke | 98.0 mm x 66.0 mm |
| Transmission | 6-speed constant mesh |
| Rear Suspension | Link-type, oil damped |
| Length | 2, 130 mm |
| Seat Height | 810 mm |
| Fuel Capacity | 17 liters (4.5 US gal) |
Motorcycle dimensions and weight specifications.
Engine type, displacement, bore, stroke, fuel system, etc.
Transmission, gear ratios, clutch, and drive chain specifications.
Specifies torque for chassis bolts and nuts during maintenance.
Adjusting front fork spring pre-load and damping.
Torque specifications for chassis components.
Specifications and limits for valve and guide measurements.
Data for camshaft height, journal clearances, and runout.
Specifications for cylinder bore, piston dimensions, and rings.
Data for connecting rod and crankshaft dimensions and clearances.
Specifications for oil pressure.
Specifications for clutch plate thickness, bore, and fluid.
Recommended tire pressures for solo and dual riding.
To Next Page
