6 SV1000K3
HANDLEBARS
REMOVAL AND DISASSEMBLY
• Remove the handlebar balancer
1.
NOTE:
Do not remove the handlebar balancer mounting screw before
removing the handlebar balancer. Slightly loosen the mounting
screw, and then pull the balancer assembly out of handlebars.
• Remove the rear view mirror
2.
• Disconnect the front brake light switch coupler
3.
• Remove the front brake master cylinder.
• Remove the right handlebar switch
4 and throttle grip
5.
• Disconnect the clutch switch lead wires
6.
• Remove the left handlebar switch
7.
• Remove the rear view mirror
8.
• Remove the clutch master cylinder.
• Remove the handlebar clamp caps.
To Next Page
Loading...
