84 SV650K7/SK7/AK7/SAK7 (’07-MODEL)
ABS COMPONENT
Wheel speed sensor – sensor rotor clearance
• Inspect the clearance between the wheel speed sensor and
sensor rotor for each wheel using the thickness gauge.
$ Wheel speed sensor – sensor rotor clearance:
0.3 – 1.5 mm (0.012 – 0.059 in)
" 09900-20803: Thickness gauge
09900-20806: Thickness gauge
ABS control unit/HU ground wire inspection
• Turn the ignition switch to OFF.
• Remove the front seat. (#SV650/SK3 7-4)
• Disconnect the battery
- lead wire.
• Remove the ABS control unit/HU cover
1.
• Remove the battery case bolts.
SAMPLE
To Next Page
Loading...
