Suzuki Swift Owner's Manual

3-22
OPERATING YOUR VEHICLE
57RK0-14E
CVT models
1) With the gearshift lever in “D” or “N”,
depress brake pedal and stop the vehi-
cle.
61MM453
57RK105
2) The ENG A-STOP indicator light (green)
(1) in the instrument cluster will illuminate
and the engine will stop automatically.
NOTE:
The ENG A-STOP system will not operate
and engine does not stop automatically
under the following conditions:
• The ENG A-STOP OFF switch is
pressed to deactivate the ENG A-STOP
system.
• The ENG A-STOP OFF light blinks.
• Engine coolant temperature is either low
or high.
• Vehicle battery performance is low.
• The temperature of the vehicle battery is
either low or high.
• Brake booster vacuum pressure is low.
• Depressing the accelerator pedal.
• Blower speed selector is set to the ON
mode and the inside of the vehicle has
not sufficiently cooled and warmed (for
the vehicle with automatic air condition-
ing).
• The defrost switch is set to the ON mode
(for the vehicle with automatic air condi-
tioning).
• During or after the ABS or ESP
®
system
is activated, and the vehicle is stopped.
• During the first period use, to initialize
the system.
• After the engine restarted automatically,
and the vehicle speed had not exceeded
approximately 5 km/h.
• When the engine is started with the hood
open.
• The vehicle has stopped on a steep hill.
• The gearshift lever is in a position other
than “D” or “N”.
• When the vehicle has stopped without
depressing the brake pedal.
• The signal to prevent stopping the
engine is received from any electronic
control systems other than the ENG A-
STOP system.
EXAMPLE
(1)
EXAMPLE
NOTICE
The brake booster becomes inoperative
and the pedal effort will increase when
the engine is stopped automatically.
If the vehicle is moving, press down
the brake pedal harder than usual.

Suzuki Swift Specifications

General

Brand	Suzuki
Model	Swift
Category	Automobile
Language	English