7-19
INSPECTION AND MAINTENANCE
57RK0-14E
52RM70090
If the coolant level is below “LOW” mark,
coolant should be added. While the engine
is cool, remove the reservoir tank cap and
add coolant until the reservoir tank level
reaches “FULL” mark. Never fill the reser-
voir tank above “FULL” mark.
Coolant replacement
Since special procedures are required, ask
an authorized SUZUKI dealer for this job.
Air cleaner
If the air cleaner is clogged with dust, there
will be greater intake resistance, resulting
in decreased power output and increased
fuel consumption.
52RS70040
1) Unclamp the side clamps (1).
2) Hold up and pull the air cleaner upper
case toward you.
3) Remove the element from the air
cleaner case. If it appears to be dirty,
clean or replace it with a new one.
4) Clamp the side clamps securely.
Spark plugs
Spark plug replacement and inspec-
tion
Since special procedures, materials and
tools are required, it is recommended that
you trust this job to an authorized SUZUKI
dealer.
NOTICE
When putting the cap on the reser-
voir tank, line up the mark on the cap
and the mark on the tank. Failure to
follow this can result in coolant leak-
age.