2-41
BEFORE DRIVING
67L-74E
67LH3-74E
• vehicle condition
• when the malfunction indicator light
comes on or blinks
Unit indication of fuel consumption
(For “L/100km” or “km/L” setting)
You can change the unit indication of fuel
consumption when selecting instanta-
neous fuel consumption in the display.
You should operate the display before the
vehicle moves.
To change the unit indication in the display,
hold in the indication selector knob (2) for
more than 2 seconds.
Every time you hold in the indication selec-
tor knob (2) for more than 2 seconds, the
unit indication in the display will be
changed between the following two dis-
plays.
67LH30208
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the information display
will be reinitialized. Readjust the display. If
you select driving range, the display will be
shown after driving for a while.
Gear position indicator (for Auto
Gear Shift models)
76MH0A044
When the ignition switch is in the “ON”
position, the display (D) indicates the gear
position.
For details on how to use the transaxle,
refer to “Using the Transaxle” in the
“OPERATING YOUR VEHICLE” section.
Lighting Control Lever
65D611
To Next Page