Suzumar DS-310 RIB - User Manual

2
1.
General information
1.1 Introduction
Dear Customer,
You are now the proud owner of a SUZUMAR inflatable boat. You have thus
acquired the assurance of quality, since our boats are manufactured in strict
conformity with safety regulations.
Each boat has a Craft Identification Number (CIN), which you will find on the
SERIAL NO plate [14 in drawing 1-1
] on boat transom, carton marks and
warranty card. They should be same. Please note down the model and its HIN:
Model name and CIN has to be mentioned in every correspondence with us or
any authorised service station. It is only with this number that we will be able to
identify your boat and give you the relevant information and service.
The specifications and information contained in this manual will be modified
without prior notice and without obligation to update them.
Keep this manual safe onboard your boat. And, if the boat is transferred, make
sure to provide this manual together to the new owner.
If you have a problem, or if you have questions concerning your boat, contact
your supplier or any SUZUMAR dealer.
You have to read this manual carefully, ensuring that you understand and are
able to operate the boat accordingly and safely.
This publication should not be copied and/or published, even partially, without
prior written authorization.
1.2 Parts in package
Do not use a sharp cutter type tool or knife to open the packing carton. Doing so,
you may damage the boat or parts.
Your boat’s package should include parts shown in drawing 1-1, list 1-a and 1-b.
MODEL
DS-
SERIAL
NO.(CIN)
CNSSL

Summary

Technical Information Overview

Full SUZUMAR Inflatable Technical Data

Presents a comprehensive table of technical specifications for various SUZUMAR models.

Pump and Valve Operation

Pump Functionality and Design

Details the boat's pump for ideal inflation pressure and avoiding over-inflation.

Valve Location and Purpose

Describes valve placement on tubes, keel, and floor for inflation/deflation.

Valve Inflation Procedure

Instructions on how to inflate using the valve's yellow button.

Valve Deflation Procedure

Instructions on how to deflate using the valve's yellow button.

Boat Assembly and Preparation

General Assembly Information

Provides advice on using the correct pump, pressure gauge, and inflation pressures.

Pre-Assembly Preparation Steps

Initial Boat Inflation

Steps for first-time inflation or after long storage, ensuring pressure balance.

DS-225 SL Model Assembly

Specific instructions for assembling the DS-225SL model.

DS-230;265 Model Assembly

Specific instructions for assembling the DS-230 and DS-265 models.

DS-290;320;360;390;420 Assembly

Specific instructions for assembling the DS-290 to DS-420 models.

Final Pressure Check and Oar Installation

DS-270;310 RIB and DS-310;350;420 FD Assembly

DS-220;260;310;350;420 VIB Assembly

Boat Operation and Safety

General Safety Instructions

Crucial safety guidelines for operating the boat.

Passenger Safety Requirements

Mandates appropriate clothing, life jackets, and seating positions.

Essential Safety Equipment

Prohibited Operations

Warns against operating under the influence of drugs or alcohol.

Load Distribution and Stability

Capacity and Motor Warnings

Advises against exceeding carrying capacity and motor limits.

Operating with Outboard Motors

Safety precautions and warnings related to outboard engine use.

Loadings and Passenger Management

Rowing Operation Procedures

Motor Operation Guidelines

Warnings and procedures for operating the boat with an outboard engine.

Towing and Mooring Procedures

Air Chamber Failure Response

Maintenance and Repair

Boat Cleaning Instructions

Boat Disassembly for Storage

Repairing Small Tears and Punctures

Suzumar DS-310 RIB Specifications

General

Brand	Suzumar
Model	DS-310 RIB
Category	Boat
Language	English