Suzumar DS-350 RIB - User Manual

2
1.
General information
1.1 Introduction
Dear Customer,
You are now the proud owner of a SUZUMAR inflatable boat. You have thus
acquired the assurance of quality, since our boats are manufactured in strict
conformity with safety regulations.
Each boat has a Craft Identification Number (CIN), which you will find on the
SERIAL NO plate [14 in drawing 1-1
] on boat transom, carton marks and
warranty card. They should be same. Please note down the model and its HIN:
Model name and CIN has to be mentioned in every correspondence with us or
any authorised service station. It is only with this number that we will be able to
identify your boat and give you the relevant information and service.
The specifications and information contained in this manual will be modified
without prior notice and without obligation to update them.
Keep this manual safe onboard your boat. And, if the boat is transferred, make
sure to provide this manual together to the new owner.
If you have a problem, or if you have questions concerning your boat, contact
your supplier or any SUZUMAR dealer.
You have to read this manual carefully, ensuring that you understand and are
able to operate the boat accordingly and safely.
This publication should not be copied and/or published, even partially, without
prior written authorization.
1.2 Parts in package
Do not use a sharp cutter type tool or knife to open the packing carton. Doing so,
you may damage the boat or parts.
Your boat’s package should include parts shown in drawing 1-1, list 1-a and 1-b.
MODEL
DS-
SERIAL
NO.(CIN)
CNSSL

Summary

Pump and Valve Operation

Pump Usage Instructions

Explains the operation of high-pressure and normal pumps for SUZUMAR boats.

Valve Operation Guide

Details the procedures for inflating and deflating the boat using the valve.

Boat Assembly

Boat Operation

Essential Safety Instructions

Provides essential safety guidelines and warnings for operating the boat.

Loadings and Passenger Guidelines

Motoring Operation Guide

Guidelines for operating the boat with an outboard motor, including warnings and checks.

Air Chamber Failure Handling

Procedures to follow in case of an air chamber puncture or failure.

Boat Maintenance

Boat Repair

Repairing Small Leaks and Punctures

Detailed instructions for repairing small tears, cuts, or punctures on the boat.

Suzumar DS-350 RIB Specifications

General

Type	RIB
Length	3.5 m
Length Overall	3.5 m
Max Load Capacity	600 kg
Max Persons Capacity	5
Tube Material	PVC
Number of Air Chambers	3
Hull Material	Fiberglass
Keel Type	Inflatable
Material	Fiberglass
Tube Diameter	45 cm