Suzumar DS-390 - User Manual

2
1.
General information
1.1 Introduction
Dear Customer,
You are now the proud owner of a SUZUMAR inflatable boat. You have thus
acquired the assurance of quality, since our boats are manufactured in strict
conformity with safety regulations.
Each boat has a Craft Identification Number (CIN), which you will find on the
SERIAL NO plate [14 in drawing 1-1
] on boat transom, carton marks and
warranty card. They should be same. Please note down the model and its HIN:
Model name and CIN has to be mentioned in every correspondence with us or
any authorised service station. It is only with this number that we will be able to
identify your boat and give you the relevant information and service.
The specifications and information contained in this manual will be modified
without prior notice and without obligation to update them.
Keep this manual safe onboard your boat. And, if the boat is transferred, make
sure to provide this manual together to the new owner.
If you have a problem, or if you have questions concerning your boat, contact
your supplier or any SUZUMAR dealer.
You have to read this manual carefully, ensuring that you understand and are
able to operate the boat accordingly and safely.
This publication should not be copied and/or published, even partially, without
prior written authorization.
1.2 Parts in package
Do not use a sharp cutter type tool or knife to open the packing carton. Doing so,
you may damage the boat or parts.
Your boat’s package should include parts shown in drawing 1-1, list 1-a and 1-b.
MODEL
DS-
SERIAL
NO.(CIN)
CNSSL

Summary

General Information

Introduction and Ownership

Provides a general overview of the SUZUMAR inflatable boat and ownership details.

Package Contents and Opening

Details how to safely open the package and lists the included parts.

Technical Specifications

SUZUMAR Inflatable Boat Model Data

Comprehensive technical data for various SUZUMAR inflatable boat models, including dimensions and capacities.

Pump and Valve System

Pump Operation and Features

Explains the functionality, usage, and types of pumps provided with the boat for inflation and deflation.

Valve System Functionality

Describes the valve's design for inflation, deflation, and maintaining airtightness for tubes and floor.

Boat Assembly and Preparation

General Assembly and Inflation Guidelines

General instructions and warnings for boat assembly and inflation, including pressure limits.

Model-Specific Assembly Procedures

Step-by-step guides for assembling different SUZUMAR inflatable boat models.

Operation, Safety, and Environment

Environmental Protection Aspects

Guidelines for protecting the environment during boat use and proper disposal of waste.

Essential Safety Precautions

Critical safety measures and warnings for boat operation, including life jackets and passenger conduct.

Loadings and Passenger Management

Rules and recommendations for loading capacity, passenger distribution, and seating.

Operation Modes (Rowing, Motoring, Towing)

Instructions for operating the boat by rowing, motoring, towing, mooring, and beaching.

Air Chamber Failure Handling

Procedures to follow in case of an air chamber puncture to ensure safety.

Maintenance and Storage

Cleaning and Washing Procedures

Instructions for cleaning the boat after use and at season's end to prevent mildew.

Disassembly and Storage Guidelines

Step-by-step process for disassembling and storing the boat properly to maintain its condition.

Repair and Warranty Information

Repairing Boat Damage

Instructions for repairing minor tears, cuts, punctures, and guidance on larger repairs.

Warranty Policy and Registration

Explains the terms, conditions, coverage, and registration requirements for the product warranty.

Suzumar DS-390 Specifications

General

Maximum engine power	25 hp
Maximum engine weight	60 kg
Type	Inflatable
Overall length	390 cm
Inside width	90 cm
Number of air chambers	3