Svan SSC800BD - User Manual

Questions and Answers

A
andersonbrendaAug 18, 2025
Why does my Svan Dryer take so long to dry?
- M
  Mary ChristensenAug 18, 2025
  If your Svan Dryer is taking a long time to dry, several factors could be the reason. The lint filter's surface may be clogged, so wash it with lukewarm water. The condenser might be clogged, so clean it. Ensure the ventilation grills in front of the machine are open to prevent the room temperature from rising too much. Clean the humidity sensor if there's a layer of limescale. Avoid overloading the dryer and select a higher spin speed on your washing machine to ensure the laundry is sufficiently spun.
H
Heather PatelAug 20, 2025
What to do if laundry comes out damp from my Svan SSC800BD Dryer?
- E
  Eric GibbsAug 20, 2025
  If the laundry is coming out damp at the end of the drying process with your Svan Dryer, it might be due to several reasons. The selected program might not be suitable for the type of laundry you're drying, so check the care labels and select an appropriate program, and consider using time programs. Also, the lint filter's surface or the condenser might be clogged, so wash the filter with lukewarm water and clean the condenser. Make sure you are not overloading the dryer and select a higher spin speed on your washing machine.
M
Michael MunozAug 22, 2025
How to fix filter cleaning warning symbol on Svan Dryer?
- P
  patricia32Aug 23, 2025
  If the filter cleaning warning symbol is on for your Svan Dryer, it could mean that the lint filter is unclean, so clean the filter. Alternatively, the filter seat might be clogged by lint, so clean the filter seat. Also, there might be a layer that causes obstruction on the surface of the lint filter, so wash the filter with lukewarm water.
J
Jasmine HicksAug 25, 2025
How to unlock or start my Svan Dryer?
- J
  Joyce MuellerAug 26, 2025
  If your Svan Dryer cannot be opened, the program cannot be started, or the dryer doesn't activate, ensure that the dryer is plugged into the socket. Check that the loading door is properly closed. Also, verify that you have set a program and pressed the Start/Pause key, ensuring the dryer is not in Standby (Pause) mode. Finally, check if the child lock is active and deactivate it if necessary.
Q
qbrownAug 28, 2025
Why is the water tank warning symbol on my Svan SSC800BD?
- S
  Samantha YoungAug 28, 2025
  If the water tank warning symbol is on or flashing on your Svan Dryer, it could be because the water tank is full, so empty the water tank. If the product is connected directly to the water outlet, also check the water discharge hose for any bends.
E
Emily ArnoldAug 30, 2025
What to do if the Svan Dryer program has been interrupted?
- J
  Joseph TapiaAug 30, 2025
  If the program on your Svan Dryer has been interrupted for no reason, ensure that the loading door is properly closed. If there was a power failure, press the Start/Pause key to restart the program. Also, the water tank might be full, so empty it.
A
April BurnettSep 2, 2025
Why have clothes shrunk in my Svan Dryer?
- R
  Rebecca WilliamsSep 2, 2025
  If clothes have shrunk, felted, or deteriorated after drying in your Svan Dryer, the program used might not be suitable for the type of laundry. Check the care labels on the laundry items and select a suitable program.
T
Trevor KimSep 4, 2025
How to fix condenser cleaning warning symbol on Svan SSC800BD?
- J
  Joshua ButlerSep 4, 2025
  If the condenser cleaning warning symbol is on your Svan Dryer, the condenser might be unclean. Clean the condenser.
S
Sarah DavilaSep 7, 2025
What to do when the filter warning LED is blinking and the Svan SSC800BD won't start?
- P
  patriciamichaelSep 7, 2025
  If the program on your Svan Dryer cannot be started and the filter warning LED is blinking, the filter seat might be clogged by lint, so clean the filter seat. Also, there might be a layer that causes obstruction on the surface of the lint filter, so wash the filter with lukewarm water. The condenser may not be placed, so replace the condenser.
K
kevin63Sep 9, 2025
Why is my Svan SSC800BD leaking water from the loading door?
- P
  Phillip StevensonSep 9, 2025
  If water is leaking from the loading door of your Svan Dryer, there might be lint accumulated on the inner surfaces of the loading door and on the surfaces of the gasket of the loading door, so clean these surfaces.