EN - 25
9. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your tumble dryer is equipped with a built-in fault detection system, indicated by a
combination of ashing operation lights. The most common failure codes are shown below.
ERROR CODE SOLUTION
E03/
Empty the water tank, if problem does not solved, contact the
nearest authorised service agent.
E04
Contact the nearest authorised service agent.
E05
Contact the nearest authorised service agent.
E06
Contact the nearest authorised service agent.
E08
There may be voltage uctuation in mains.Wait until voltage is
appropriate for working range.
To Next Page
Loading...
