30
Recall Function
After switching off the hob ( ), it is possible to recall the last settings.
• cooking stages of all cooking zones (Booster)
• minutes and seconds of programmed cooking zone-related timers
• Keep warm function
• Automatic cooking
The recall procedure is following:
• Press the key [ ]
• Then press [ ] before the light stops blinking.
The previous settings are again active.
“Keep warm” Function
This function allows the reach and automatically maintains at the temperature of 42, 70 or 94°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
• To engage, to start the function « Keep warm »:
Action Control panel Display
42°C to engage Press once on key [ ] [ U ] and [ ]
70°C to engage Press twice on key [ ] [ U ] and [ ]
94°C to engage Press 3 times on key [ ] [ U ] and [ ]
To stop Slide on the “SLIDER“ [ 0 ] to [ 9 ]
or press key [ ] until [ 0 ] [ 0 ]
The maximum duration of keeping warm is 2 hours.
Bridge Function
This function allows the use of 2 cooking zones at the same time with the same features as a
single cooking zone. With this function the Booster function is allowed.
Action Control panel Display
Activate the hob Press display [ ] [ 0 ]
Activate the bridge Press simultaneously on
[ ] of the 2 cooking zones [ 0 ] and [ ]
Increase bridge Slide on the “SLIDER“
witch indicates the power [ 1 ] to [ 9 ]
Stop the bridge Press simultaneously on
[ ] of the 2 cooking zones [ 0 ]
Control panel locking
To avoid modification of the setting of the cooking zones, in particular during cleaning, the control
panel can be locked (with exception to the On/Off key [ ]).
Action Control panel Display
Locking the hob Press [
] during 6s locking light on
Unlock the hob Press [
] during 6s locking light off
To Next Page
Loading...
