What to do if there is no sound from my Sven MS-2055 Speakers?
If you're experiencing no sound or very quiet sound from your Sven Speakers, first, make sure the volume isn't set too low; adjust the volume control. Also, verify that the audio source is properly connected.
How to fix Sven MS-2055 Speakers that won't turn on?
If your Sven Speakers do not turn on, ensure that the speakers are properly connected to a mains outlet. Also, check that the power switch is turned on.
Why is the remote control for my Sven MS-2055 Speakers not working?
If the remote control for your Sven Speakers isn't working, the first thing you should do is replace the batteries with new ones.
How to stop sound distortion on Sven MS-2055 Speakers?
Sound distortion in Sven Speakers is often due to a large amplitude of the input signal. Try turning down the volume on both the source and the speakers themselves.
General| Type | 2.1 |
|---|---|
| Total Power Output (RMS) | 20W |
| Impedance | 4Ω |
| Signal-to-Noise Ratio | ≥ 75 dB |
| Input Sensitivity | 500 mV |
| Bluetooth | Yes |
| USB | Yes |
| FM Radio | Yes |
| Inputs | USB |
| Power Supply | AC 220V, 50Hz |
| Satellite Dimensions | 90 x 180 x 90 mm |
| Input Connector | 3.5mm |
To Next Page
