AUX
Micro SD
USB HOST
USB DC OFF/ON
Turn on the speaker system Bluetooth mode press button b several times until
the display will not show "BLUE".
It is necessary to select the search mode of devices with Bluetooth on a signal
source (telephone, notebook, smartphone, etc.). «SVEN PS-175/PS-185/PS-190»
massage will be displayed on the screen which is to be connected to*.
When connection is successful, there will be a short beep and the indication of the
search mode on speaker system is over**.
Radio mode
To improve radio reception, connect the cable USB-micro USB cable (included) to the
input
j.
Turn on the speaker system press button b several times until, the radio mode
will not turn on. Long press the button
a activates auto search mode. After scanning
completion, the rst scanned radio station will start to operate automatically. With
buttons c and d select a desired radio station.
Fig. 3. Connection diagram
Mobile devices
ENG
17
Users Manual
PS-175, PS-185
PS-190
* You might have to enter 0000 code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name SVEN PS-175/PS-185/PS-190 and
the connect command on the source.
USB to micro USB Power cable
Mini-jack to mini-jack
signal cable
USB jack
Socket
PC