If none of the above mentioned solutions removes the problem, please consult a nearest
authorized service center. Never try to repair the device on your own.
8. TROUBLESHOOTING
Solution
А. Check whether the gamepad is connected properly to
your PC.
B. Make sure that all the settings in Game Controller are
installed and confirmed.
C. Check whether the settings of gamepad are in conflict
with other peripherals.
D. Restart your PC if the device still does not work normally.
Install DirectX 7.0 or higher.
The gamepad hasn’t been calibrated or the calibration hasn’t
been confirmed.
Enter My computer → Properties → Hardware → Device
manager and delete corresponding equipment with «!» mark
and reconnect the gamepad to the PC. Then your PC will find
the driving system.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set the force of feedback.
Problem
The gamepad does not work
normally after installation of
drivers on the PC.
Drivers can’t be installed on the
PC.
Some analog axis goes into
effect automatically.
After connecting the gamepad,
its driving program can’t be
found.
After entering the game,
vibration feedback function
operates automatically.
During the game vibration
feedback is insufficient.
6
ENG
PC Wired Gamepad
To Next Page
Loading...
