SWAGTRON SWAGGER 3 - 2.7 Standing, Folding, and Unfolding

16
ENGLISH
2.7 Standing, Folding, and Unfolding
•Beforemoving,lifting,orotherwisetransportingthescooter,turnitoff.
•Keepfingersawayfromallmovablepartsofthescootertopreventinjurytofingersorotherbodyparts.
Standing
Before using the kickstand, bring the scooter to a complete stop and turn it off. Before
riding the scooter again, lean the scooter off the kickstand and push the kickstand up.
1. Locate the kickstand on the side of the scooter’s deck.
2. Push the kickstand down and away from the scooter.
Then carefully lean the weight of the scooter onto the kickstand.
Folding
Step 1. Pull the lever down towards the deck. The pin
connected to the lever should slide up out of its notch.
If the lever is hard to move, try pulling stem
away from the deck slightly in order to ease the
tension on the folding mechanism.
Step 2. With the lever moved, pull the stem down towards
the deck, line the pin up with the third notch, and push the
lever back into place as needed.
Make sure the pin slides into the notch and the lever fully moves
back in place otherwise the scooter may unfold.