18
ENGLISH
SECTION 3: CHARGING
CHARGE THE SCOOTER BEFORE USING IT.
3.1 How to Charge
Step 1. Make sure the scooter is turned off and remove charging port’s cap. Connect the charging cable and
adapter together if needed.
Step 2. Connect the charging cable to the scooter, then connect it to a wall outlet.
Step 3. Allow 5~6 hours charging time. During charging, the charger light will turn red.
Step 4. When the scooter is fully recharged, the charger light will turn green. Disconnect the scooter from the
charger.
DO NOT under any circumstances use the scooter while it is charging or connected to the
charger.
The charging time is 5~6 hours. Charging longer than that may affect battery life and/or
performance. If the charger’s light doesn’t turn on, it may not be fully connected. Check
that it is securely connected to the wall and to the scooter.
To Next Page
Loading...
