29
29
Display: Channel Settings
Channel: Choose the channel that you want to edit here.
Channel Name (checkbox): Enable the display of the channel’s name on screen.
Channel Name: Enter a name for the camera you’ve selected.
Position Settings: Select the position of the channel name label that is overlaid on screen.
Date/Time (checkbox): Enable the display of the date and time displayed on screen.
Position Settings: Select the position of the Date/Time labels that are overlaid on screen.
Mask (checkbox): Enable the masking function.
Mask (Setup): Lets you create and place a “privacy mask” to conceal parts of the image
on the associated channel.
Display: Output
Resolution: Set the screen resolution to output to your monitor.
Transparency: How transparent you want the menus to be.
Mouse Sensitivity: Adjust the sensitivity of mouse movements.
Dwell Time: Select how long channels will be displayed when using auto-sequence mode.
Audio: This function is not supported by the camera(s) supplied with the DVR.
Device Settings Screen
To Next Page
Loading...
