Swann dvr4-1500 - User Manual

1 2 3
4 5 6
7 8 9
1
EN
Digital Video Recorder
Quick Start Guide
Welcome!
Lets get started.
Congratulations on the purchase of your Swann DVR. This quick start guide will assist you
on getting your DVR up and running as soon as possible. We recommend that you connect
everything and give it a try before you do a permanent installation, to make sure nothing was
damaged during shipping. On the other side is a detailed connection map which illustrates the
various connections on the DVR.
A) Video Inputs
B) Video Out
C) HDMI
D) VGA
E) Audio In
F) Audio Out
G) LAN
H) USB
I) Power
J) Power LED
K) LAN LED
L) HDD LED
Here are explanations for the various connections and lights on the DVR -
A) Video Inputs – This where you connected the included cameras.
B) Video Out – If you have an older analogue TV, connect this to an available video input.
C) HDMI – If you have a digital TV with HDMI input, connect this to an available input.
D) VGA - If you have a digital TV or a monitor with VGA input, connect this to an available input.
E) Audio In – For connecting a microphone for two-way communication (like an intercom).
F) Audio Out - For connecting speakers.
G) LAN – Connect this to your home network so your DVR can connect to the Internet.
H) USB – Connect the mouse here, able to connect a Flash Drive to backup recorded events.
I) Power – This is where you connect the power adapter.
J) Power LED – When the DVR has power, this light will turn on.
K) HDD LED – This will flash when the hard drive is working.
L) LAN LED – This will flash when there is network activity.
Connect the HDMI cable (supplied) to the HDMI input on the DVR, and connect the other end to
a spare HDMI input on the TV.
Connect the BNC to RCA video cable (supplied) to the video output on the DVR, and connect the
other end to a spare video input on the TV.
If you are using the HDMI cable for connection, you can skip this step.
Included in the box is a set of video & power cables for each camera provided. You will see a
label on each end, denoting which end is plugged into which connection. Connect the yellow
connection for video and the red connection for power. Connect the yellow connection on the
other end of the cable to each of the video inputs on the DVR. Use the supplied power splitter
to connect to the red connection and then connect the power adapter to the power splitter as
illustrated.
Connect the Ethernet cable (supplied) to the LAN connection on the DVR, and then connect the
other end to a spare port on your router or wireless access point.
It’s important that you do this, as this allows you to access the router from your smartphone
or tablet. It also allows the DVR to connect to the Internet to update its internal clock so the
time it shows on the video is always accurate, and to send you email notifications.
Connect the mouse (supplied) to a spare USB port on the DVR. Connect the power adapter (supplied) to the power input on the DVR. There will be a label on
the power adapter indicating that it is for the DVR and not the cameras.
All the connections have now been completed. You’re now ready to run through “The Setup
Wizard” to configure your DVR.
QH1550230114E | © Swann 2014
A
Getting to know your DVR
B
What does this mean?
D
Connect the DVR to your TV (RCA/Composite)
E
Connect your Cameras
F
Connect to your Home Network
G
Connect the Mouse
H
Connect the Power Adapter
C
Connect the DVR to your HDTV (HDMI or VGA)
LAN & USB
12V
VGA
VIDEO
OUT
AUDIO OUT
AUDIO IN
VIDEO IN
HDMI
A B D F H I
C E G
J
K
L
HDMI IN 2/MHL
HDMI IN 1(DVI)
LAN & USB
12V
VGA
VIDEO
OUT
AUDIO OUT
AUDIO IN
VIDEO IN
HDMI
VGA IN
If your HDTV has a VGA input
or you have a Monitor with a
VGA connection, connect a
VGA cable (not supplied) to
the VGA output on the DVR,
and connect the other end to
the VGA input on the HDTV or
Monitor.
We recommend using the HDMI connection
as it will provide you with the best display quality.
USB
Interne t
Etherne t
4
3
2
LAN & USB
12V
VGA
VIDEO
OUT
AUDIO OUT
AUDIO IN
VIDEO IN
HDMI
Connect the
camera to the
video and power
cable.
Connect the
provided
power splitter
to the video
and power
cable, then
connect this
to the power
adapter.

Summary

What does this mean?

Video Inputs

Connects the included cameras to the DVR.

Video Out

Connects to older analog TVs for video output.

HDMI Connection

Connects to digital TVs with HDMI input for high-quality video.

VGA Connection

Connects to digital TVs or monitors with VGA input.

Audio In

For connecting a microphone for two-way communication.

Audio Out

For connecting speakers.

LAN Connection

Connects DVR to home network for internet access and notifications.

USB Port

Connects mouse or flash drive for backups and firmware updates.

Power Input

Connects the power adapter to the DVR.

Power LED

Indicates when the DVR has power.

LAN LED

Indicates network activity.

HDD LED

Flashes when the hard drive is working.

Connecting Your DVR and Cameras

Connect DVR to HDTV (HDMI or VGA)

Connects DVR to TV using HDMI for best quality or VGA.

Connect DVR to TV (RCA;Composite)

Connects DVR to TV using BNC to RCA video cable.

Connect Cameras

Connects cameras via video/power cables and power splitter.

Connect to Home Network

Connects DVR to router via Ethernet for internet access.

Connect Mouse

Connects the mouse to a spare USB port on the DVR.

Connect Power Adapter

Connects the power adapter to the DVR's power input.

Swann dvr4-1500 Specifications

General

Heat function	-
Camera included	Yes
Camera interface	BNC
Housing material	Aluminum
Camera resolution	648 x 488 pixels
Number of cameras	1
Placement supported	Indoor/outdoor
Minimum illumination	0 lx
Night vision distance	20 m
Connectivity technology	Wired
Number of illumination LEDs	24
Surveillance camera form factor	Bullet
HDD interface	Serial ATA II
Channels quantity	4 channels
Display frame rate	30 fps
Storage media type	HDD
Total storage capacity	32 GB
USB 2.0 ports quantity	2
Analog signal format system	NTSC, PAL
Ethernet interface type	Fast Ethernet
Display diagonal	- \
Operating temperature (T-T)	-20 - 75 °C
Cables included	BNC, UTP

Weight and Dimensions

Camera depth	70 mm
Camera width	50 mm
Camera weight	465 g
Recorder depth	45 mm
Recorder width	200 mm
Recorder weight	1000 g