5
Connecting the Cameras 2
1. Connect the output connection of the
power extension cable to the power input
on the camera. Then connect the other
end to one of the outputs on the power
splitter cable. Repeat this step for the
other camera provided. Connect the other
end of the power splitter to the 12V power
adapter provided.
2. To reset the camera,
press and hold the reset
button, connect power and
continue holding for 10
seconds.
3. The LAN port is mainly
used to configure the
camera to your Wi-Fi
network.
4. Connect the 12V power
adapter into an electrical
outlet.
1
1
2
3
4
1
1
1
2
3
4
1
1
1
To Next Page
Loading...
Need help?
General
