Need help?Do you have a question about the Swann NVR-7085 models and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| USB Interface | 2 x USB 2.0 |
| Motion Detection | Yes |
| Remote Viewing | Yes |
| Video Input | 8 x BNC |
| Video Output | HDMI, VGA |
| Hard Drive Support | Up to 6TB SATA HDD |
| Audio Input | 1 RCA connector |
| Audio Output | 1 RCA connector |
| Network Interface | RJ45 Ethernet |
| Operating Power | 12V DC |
| Mobile Viewing | Yes |
Explains the device's compliance with FCC rules and potential interference mitigation.
Details the default NVR username and password, emphasizing security.
Provides instructions for replacing or disposing of the NVR's internal battery.
Lists critical safety guidelines for installation and operation of the NVR.
Outlines specific safety precautions to follow when handling batteries.
Outlines the three primary stages required to set up the NVR for operation.
Guides users on connecting and monitoring the NVR using mobile devices via the SwannView Link app.
Essential recommendations for installing the NVR safely and correctly in its environment.
Details the LEDs and controls located on the front of the Network Video Recorder.
Explains the various ports and connectors found on the rear of the NVR.
Illustrates how to connect cameras, monitors, and network devices to the NVR.
Instructions for connecting external storage drives and other USB devices to the NVR.
Guides users on navigating the NVR interface using the included USB optical mouse.
Covers initial NVR setup steps including language, video format, and time zone settings.
Details configuring camera detection and setting up email alerts for events.
Explains how to configure the NVR's system time and synchronize it with NTP servers.
Guides users on setting up passwords and user accounts for NVR access.
Instructions for connecting the NVR to mobile devices using the SwannView Link app.
Guide to installing and configuring the SwannView Link software on a computer for remote access.
Explains how to use the live view screen and interpret status icons on the NVR.
Describes the functions of the NVR's menu bar and quick camera toolbar.
Details how to add, edit, and delete IP cameras connected to the NVR.
Adjusting camera feed appearance, names, and overlay information.
Configuring screen resolution, menu transparency, and mouse sensitivity.
Customizing video resolution, frame rate, and maximum bitrate for recordings.
Setting pre-record, post-record, overwrite, and pack duration for video storage.
Defining the NVR's recording schedule based on time and recording mode.
How to initiate playback, search for recordings by date/time, and view details.
Instructions for backing up specific video segments using the cut and copy functions.
Setting up IP addressing, subnet mask, default gateway, and DNS servers.
Configuring DDNS, NTP, email settings, IP filters, and server ports.
Explains how motion detection works and how to configure its sensitivity and areas.
Configuring actions for when a camera feed is lost, including audio warnings and email alerts.
Setting up alerts for events like HDD full, HDD error, network disconnection, or IP conflict.
Managing connected hard drives, including initialization, formatting, and capacity checks.
Configuring language, video standard, time zone, date format, and auto lock time.
Creating and managing user accounts with different access levels and permissions.
Performing firmware upgrades, restoring default settings, and exporting/importing configurations.
Explains the main interface elements of the SwannView Link software for remote monitoring.
Customizing how the SwannView Link software saves footage and snapshots on the local PC.
Configuring camera, output, recording, and network parameters via the software.
Provides solutions for frequently encountered problems with the NVR and its software.
Guidance on configuring network devices like routers and managing IP addresses.
Details the terms and conditions of the product's warranty coverage.
Provides phone numbers and email addresses for Swann technical assistance.
To Next Page
