The IP Filter can be used to modify which IP addresses have permission to talk to the NVR and which do not.
This is an advanced feature, and is recommended for advanced users only. Tinkering with things here - if you’re not sure what
you’re doing - is more likely to break things than make anything better.
Network: Advanced: IP Filter
Network: Network Status
The Network Status screen displays a quick summary of your network settings. You can’t alter things here - see the General
and Advanced tabs for places to actually alter things.
Note that the values displayed in the image to the left are examples only. Your network settings may be similar or very different!
To Next Page
Loading...
