Do you have a question about the Swann ADVANCED-SERIES H.264 and is the answer not in the manual?
Video Input | 4 Channels |
---|---|
Remote Viewing | Yes |
Mobile Viewing | Yes |
Mobile App | SwannView Link |
Operating System Compatibility | Windows, Mac |
Motion Detection | Yes |
Recording Frame Rate | 30 fps per channel |
Audio Input/Output | 1 audio output |
Network Interface | Ethernet |
USB Ports | 2 |
Power Supply | 12V DC |
Alarm Triggers | Motion Detection |
Crucial safety instructions and warnings for proper operation and to avoid damage.
Essential guidelines for protecting the DVR from moisture, dust, heat, and physical shock.
Identifies and explains the function of each connection port on the rear of the DVR.
Step-by-step guide for connecting cameras, power, and monitors to the DVR.
Recommended sequence for setting up the DVR, including testing, password, date/time, and hardware.
Overview of the main menu sections: Camera, Record, Network, Search, Devices, HDD, Alarm, PTZ, Mobile, Motion, System.
How to define recording times and modes for channels.
Introduction to network configuration, including DHCP, STATIC, and PPPoE.
Explains port configuration, IP/Subnet/Gateway addresses, and DNS settings.
How to search for recordings by date/time and view the file list.
Instructions on how to copy recorded footage to a USB flash drive.
Detailed explanation of playback controls like Rewind, Slow, Play, Pause, and Volume.
Guide to installing the software needed to play DVR footage on a PC.
Checking HDD status, total space, free space, and usable recording time.
Steps to set up automatic email alerts for alarm events.
Enabling and setting sensitivity for motion detection on camera channels.
How to select specific areas within a camera's view for motion detection.
How to set and manage passwords for DVR access and security.
Essential requirements for remote access, including internet speed and network configuration.
Using UPnP and port forwarding for secure internet access to the DVR.
Step-by-step guide for installing or replacing the DVR's hard drive.
Troubleshooting steps for power issues and "NO HARD DISK" errors.