EasyManua.ls Logo

Swann ADVANCED-SERIES H.264 - Technical Specifications

Swann ADVANCED-SERIES H.264
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specifications
38
DVR
Video
Video Format PAL or NTSC
Video Inputs 4 x Composite BNC Inputs
Video Outputs 2 x Composite BNC Outputs, 1 x VGA Out
Display Resolution NTSC: 704 x 480, PAL: 704 x 576 (Composite Video)
VGA: Up to 1400 x 900
Display Frame Rate NTSC: 30fps, PAL: 25fps
Audio
Audio Inputs 4 x RCA Audio Input
Audio Output 2 x RCA Audio Output
Recording
Compression Format H.264
Recording Resolution NTSC: D1 (704x480), HD1 (704x240), CIF (352x240)
PAL: D1 (704 x 576), HD1 (704 x 288), CIF (352 x 288)
Recording Frame Rate (Global) NTSC: 60 fps D1, 120fps HD1, 240fps CIF*
PAL: 50fps D1, 100fps HD1, 200fps CIF*
Maximum Frame Rate per Channel NTSC: 30fps PAL: 25fps
Recording Modes Manual / Motion / Schedule / Alarm
Multiplex Operation Triplex
HDD Interface SATA
Hard Drive Support Up to 2TB
Network
LAN Connection Yes
Network Interface RJ45
Network Protocol(s) TCP/IP. DDNS
Network Types Static IP, DHCP, PPPoE
Remote Operation Yes
General
Operating Power DC12V
Dimensions
Weight 4 ~ 5lb (2 ~ 2.5kg) - varies by HDD installed
Backup Method USB to Flash Drive
Mouse Support 1 x USB
Remote Control 1 x Infrared Controller
Remote Battery Type 2 x AAA
* 240fps/200fps @ CIF resolution is the equivalent frame rate.
Channels can have a maximum of 30fps/NTSC or 25fps/PAL, regardless of resolution.
Thus, the DVR has a maximum frame rate of 120fps/NTSC or 100fps/PAL.
Selecting CIF will allow you to store additional footage on the hard drive,
or allow other channels to operate at a higher resolution without compromising frame rate.

Related product manuals