Need help?Do you have a question about the Swatch Lasag SLS 200 CL16 and is the answer not in the manual?
Details personnel qualifications and training requirements for service and repair.
Covers safety notices, danger signs, symbols, labels, and measures for class 4 lasers.
Provides laser specifications, applicable fibers, electrical specifications, and air cooling data.
Details laser specifications, applicable fibers, electrical specs, and air cooling for CL16.
Provides laser specifications, applicable fibers, electrical specs, and water cooling data.
Details laser specifications, applicable fibers, electrical specs, and water cooling for CL60.
Summarizes maximum safe laser energy, power, pulse length, and warning labels.
Provides diagrams illustrating flash lamp lifetime based on lamp voltage and pulse duration.
Provides general remarks and technical data for LLBK processing heads.
Details LLBK25 head specifications, including theoretical spot sizes and accessories.
Provides specifications for LLBK26 heads, noting oil/shake proofing and pre-adjusted versions.
Details LLBK45 head specifications, including theoretical spot sizes and notes.
Describes LLBK60 head features like superior vision, zoom, and modular concept.
Guides on adjusting the pilot laser for non-folded resonators.
Details procedures for opening the cavity, changing components, and fine adjustment.
Details procedures for opening the cavity, changing components, and fine adjustment.
Lists interlock and safety circuit errors with signal, significance, and measures.
Describes the buildup, coincidence error, and basic safety circuit schematic.
Lists machine safety errors including water flow, temperature, and air temperature issues.
Details errors related to parameter limits like frequency, pulse duration, and voltage.
Lists hardware-related errors such as interface issues, RTR, or beam expander faults.
Covers control-related errors like message format, authorization, and software issues.
Details terminal-related errors including modem, line, and telegram issues.
Provides essential safety warnings regarding spare parts and accessories.
Details spare parts and accessories for direct beam guidance and fiber optic processing heads.
Details the procedure, departure point, and checks for service personnel start-up.
Specifies maintenance regulations and provides a maintenance plan for service personnel.
Covers aids and procedures for adjusting beam changeover and beam-splitting.
Details aids, point of departure, installation, and adjustment of fiber optic connections.
Covers changing mirrors, beam-splitting plates, and cleaning the lifting module.
Details signals for I/O Board 1, including digital inputs/outputs and analogue signals.
Explains the components and function of the NLS pulse generator.
Provides instructions for replacing the NLS and loading parameters.
Introduces the RTPS power supply, its operating principle, and pulse shapes.
Details removal/installation procedures for RTPS, C-module, inductivity, RTR controller, de-ionizing cartridge, pump, and detector.
General| Brand | Swatch |
|---|---|
| Model | Lasag SLS 200 CL16 |
| Category | Welding System |
| Language | English |
To Next Page
