Swatch Lasag SLS CL Series User Manual

Release 0101 Sept 08
SLS CL
Pulsed Nd:YAG lasers
10 to 220 W output
Service Instructions Laser Sources SLS CL

Swatch Lasag SLS CL Series Specifications

General

Brand	Swatch
Model	Lasag SLS CL Series
Category	Welding System
Language	English

Summary

1 Introduction and additional safety notices

1.2 Authorised persons

Details personnel qualifications, training requirements, and responsibilities for service and repair.

1.3 Additional safety notices for service personnel

Covers safety notices, danger signs, class 4 laser measures, safety rules, and operating modes.

2 Technical data SLS CL

2.1 Technical data

Details laser specifications, applicable fibers, electrical specifications, and air cooling for SLS 200 models.

3 Working Range Diagrams

Flash lamp life time

Graphical representation of flash lamp lifetime based on lamp voltage and pulse duration.

4 Technical data of the integrated optical system LOS

4.3 Technical data of the fiber optic connection module

Specifies technical data for fiber optic connection lenses, quantity, and adjusting devices.

5 Technical data of the beam guidance with fiber optic cables

5.2 Technical data of the fiber optic cables LL-97

5.3 Technical data of the fiber optic processing head

Details technical data for various LLBK fiber optic processing heads, including spot sizes and configurations.

6 Error messages

6.1 Structure of the error messages

6.2 Error messages I = Interlock, safety circuit

Lists interlock and safety circuit error codes, their significance, and troubleshooting measures.

6.3 Error messages M = Machine safety

Details machine safety error messages related to temperature, water flow, and power supply issues.

6.4 Error messages L = Limits

6.5 Error messages H = Hardware

6.6 Error messages C = Control

8 Start-up and maintenance of the laser source

8.2 Start-up of the laser source with service personnel

Provides detailed procedures for service personnel to start up the laser source.

8.4 Maintenance regulations

Details the maintenance plan for service personnel, including inspection activities and intervals.

8.5 Maintenance report

9 Adjustment and repair of the SLS optical system LOS

9.1 Basic adjustment optical system

Covers general procedures, aids, and adjustments for non-folded resonators.

9.2 Basic adjustment optical system CL8

Details basic adjustment procedures, aids, and pilot laser control for CL8 optical systems.

9.3 Optical tests in accordance with ATP

9.5 Repairs to the optical system

Provides step-by-step instructions for opening the cavity, changing components, and performing repairs.

10 Adjustment and description fiber-optic cable coupling LOS

10.1 Adjustment of the beam changeover, resp., beam-splitting

Details aids and procedures for adjusting beam changeover and beam-splitting.

10.2 Adjustment of the fiber optic connection

Covers aids, procedures, and verification steps for adjusting fiber optic connections.

10.3 Repair and maintenance

10.4 Description of the control

10.6 Settings

10.7 Mirror configurations

Illustrates various mirror configurations for energy sharing, time sharing, and combined modes.

12 Description and repair NLS

12.1 Technical data of the NLS

12.3 Plug designation of the NLS

12.4 NLS Signals description

Describes signals from and to the NLS, detailing I/O assignments and significance for each pin.

12.5 NLS Pulse generator

Explains the components and function of the NLS pulse generator, including timing diagrams.

12.6 Removal and installation of the NLS

Provides instructions for replacing, updating, or repairing the NLS unit and loading parameters.

12.7 Removal and installation of the PC104-modules in the NLS

13 Description and repair LV CL

13.1 Description of the power supply

Explains the operating principle of the Real Time Power Supply (RTPS) and its components.

13.2 Description of the modules

13.3 Removal- and installation of modules

Details procedures for removing and installing various modules like RTPS, C-module, inductivity, and RTR controller.