EasyManua.ls Logo

Swefog Ultimate 300 - How to Use this Guide; Quick Setup Guide

Swefog Ultimate 300
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
HOW TO USE THIS GUIDE:
For your safety, it is important that you read this manual thoroughly before you operate the Ultimate
300.
This manual describes how to unpack, plan for, set up and operate the Ultimate 300. It also lists
important safety precautions and a separate service & maintenance manual for technical support.
In this manual you will find the following symbols:
CAUTION: This symbol appears adjacent to caution messages.
Not heeding these messages could result in minor personal injury
and / or damage to equipment.
WARNING: This symbol appears adjacent to warning messages.
Not heeding these messages could result in serious personal injury !
QUICK SETUP GUIDE:
1. Read chapter 3: “safety precautions”.
2. Place machine on a level surface.
3. Fill Swefog Ultimate haze fluid in the tank, fill slowly, and
do NOT exceed the “max” level indicator !
4. Connect air tube and electrical cable between the units.
5. Connect to a mains outlet with earth lead.
6. (DMX-able models only): connect a DMX cable to the male
XLR connector.
7. (DMX-able models only): set a DMX address 1-255
8. Switch the machine ON.
!
CAUTION !
WARNING