Need help?Do you have a question about the Swegon P.LEMMENS TAC4 DG and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | Swegon |
| Model | P.LEMMENS TAC4 DG |
| Communication Protocol | Modbus RTU |
| Input Voltage | 24 V AC/DC |
| Protection Class | IP20 |
| Relative Humidity | 5% to 95% (non-condensing) |
General information including schematics and control panel labels.
Instructions for connecting the RC TAC4 to the TAC4 DG circuit.
Determining which module controls the fans in the system.
Overview of fan control modes and operations.
Configuration and definition of time slots for operation scheduling.
Procedures for switching between manual and automatic modes.
Comprehensive overview of alarm types and their management.
Functionality and setup for the BOOST airflow feature.
Operation and wiring of the freecooling feature.
Management of inlet dampers by the TAC4 DG controller.
Overview of systems to prevent heat exchanger frosting.
Control of the KWout electrical coil for post-heating.
Post heating regulation for the NV option.
Regulation of external coils using the SAT BA/KW option.
Information on the RC TAC4 display functions and parameters.
Details and wiring for the fan failure alarm.
Output signals representing actual airflow and pressure values.
Explanation of advanced configuration options for the system.
To Next Page
