Do you have a question about the Swegon TACTouch TAC5 and is the answer not in the manual?
Power Supply | 24 V AC/DC |
---|---|
Protection Class | IP20 |
Inputs | Analog, Digital |
Outputs | Analog, Digital |
Operating Temperature | 0°C to +45°C |
Connectivity | Modbus, BACnet |
Important safety warnings regarding electrical connections and assembly by qualified personnel.
Manual is a supplement to the TAC5 controller manual; observation of both is required.
Manuals should be stored diligently and forwarded to new users upon device transfer.
Explanation of graphic symbols used in the manual for information and warnings.
Product meets WEEE Directive 2012/19/EU for waste electrical and electronic equipment.
TACTouch control panel is designed to control the TAC5 controller in household/industrial environments.
Device features a touchscreen; navigate by pressing symbols on screen for menu selection.
Displays schematics and key values like temperatures and fan speeds when the heat exchanger is active.
Update control panel software via microSDHC card inserted into the panel interface.
Lists specifications including supply power, current consumption, protection class, and operating temperatures.
Avoid direct atmospheric influence, vibrations, condensation, and water exposure; adhere to temperature limits.
Panel designed for wall mounting at approximately 1.5m height; avoid locations with strong sunlight or poor air circulation.
Guidelines for mounting frame, drilling holes, and attaching the panel; installation by trained personnel recommended.
Install with mains supply disconnected; do not mix cable poles. Adhere to resistance and length limits.
Clean outer surface and screen with a soft, dry cloth; avoid flammable agents, wet cloths, or sharp objects.
Diagrams showing connections for TAC5 DT/DG, TAC5 DM, and TAC6 controllers, including wiring colors.
Overview of centralized TAC5/TAC6 systems and advanced setup for SAT MODBUS addressing.
Details on zlib, FatFs, and sha2 licenses used in the product.