SWELLPRO SPLASH DRONE - Page 42

©2016 SwellPro All Rights Reserved
42
Q26: Is the Splash Drone available to set the moving boat as its home point to execute
Return-Home function?
A: No. The Return-Home function in Splash Drone is basing on the GPS coordinate, it only records the
GPS data of the taking-o location as the home point to execute return to home.
Q27: When the drone lands on at ground, why is it that the motors won't stop spinning
immediately once the throttle is at 0% position?
A: Actually, It's the consideration of safety issue. After the drone lands smoothly and the throttle is at 0%
position, it's required to keep it at 0% for 5s until the motors stop spinning, and then the drone will lock
automatically.
Q28: Is the Return-Home available when the drone is out of control suddenly?
A: No, it isn’t available. Because it's the strong magnetic eld interference that causes the lose control. It's
advised to switch the ight mode to ATTI to take over ight, and then manually bring the Splash Drone
back into visual sight.
Q29: What are the factors leading to shorten the ight time?
A: 1. The battery is not fully charged; 2. Add on loading weight; 3. Battery is aging after long time usage.
4.high winds. 5 aggressive ight by the pilot will also consume more energy.
Q30: Can I disassemble the Splash Drone for some modications?
A: Any modication & disassembly on Splash Drone is strictly forbidden. Swellpro is exempt from any
liability that caused by private modication & deliberate operations, especially the leakage issue &
component burnt after disassembling the drone!