Swift EB310D User Manual

Assembly
WARNING: Before performing any
work on the garden tool, remove the
battery.
Installing the guard
CAUTION: Never operate the trimmer
with missing or broken guard or without
guard in position.
• Loosen and remove the screws
from the underside of motor
housing.
• Place the guard on the motor
housing (1) and align the holes
vertically.
• Screw in the screws and tighten
them (2).
Split shaft assembly
Adjust the trimmer length to the height
of the user.
• Insert the shafts together as
illustrated (1).
• Tighten the knob (2).
Attach the handlebar
Attach the handlebar at the end of the
foam tube.
• Loosen the locking lever on the
handlebar (1).
• Set the handlebar to the required
position (2).
• Secure the handlebar by folding
down the locking lever.
Attach blades
• Remove the rubber cap from
handle bar (1).

Swift EB310D Specifications

General

Brand	Swift
Model	EB310D
Category	Trimmer
Language	English