EasyManuals Logo

Swift Sterling User Manual

Swift Sterling
241 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
FITTED EQUIPMENT
145
12V DC operation (vehicle’s battery)
Select “Battery voltage” by pressing
button (4)
• Set temperature step by pressing button (6)
Gas operation
• Select “Gas” by pressing button (3)
• Set temperature step by pressing button (6)
RM 8XX1 MODELS
MES appliances
(manual energy selection)
Electrical operation
Fig. 16
1
2
43
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button (2) :
12V operation :
Press button (4) :
Gas operation
Fig. 17
3
Gas operation :
Press button (3) :
The ignition process is activated automatically
by means of an automatic igniter.
Note: The flame extinguishes after
reaching the preset cooling compartment
temperature and ignites again if the cooling
compartment temperature increases again.
If the flame is not lit after the first ignition
attempt, the automatic igniter repeats the
ignition twice (duration 30 s) at time intervals
of 2 minutes. If the flame is not lit afterwards,
a fault is indicated.
Setting of cooling compartment
temperature
Fig. 18
6
7
Select the desired cooling compartment
temperature by pressing button (6) .
The LED display (7) of the selected
temperature setting is illuminated.
The scale starts with MIN position at the left
LED position (small bar = highest temperature)
and climbs up to MAX position at the right LED
position (large bar = lowest temperature).
Note: The temperature levels do not relate
to absolute temperature values.
Additional features
The brightness of the display reduces after a
few seconds if no other buttons are pressed.
The indicator lights again if a button is
pressed. Press the button again to activate
the required function.
Failures are indicated by flashing of the failure
indicator LED.
Should the door be kept open for too long
(more than 2 minutes), an acoustic signal is
initiated (pulsing whistle tone).
Should the electronic control detect any
failure, an acoustic signal will sound (pulsing
whistle tone). At the same time the display
starts flashing (for trouble-shooting, please
refer to page 157).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Swift Sterling and is the answer not in the manual?

Swift Sterling Specifications

General IconGeneral
BrandSwift
ModelSterling
CategoryCaravans
LanguageEnglish

Related product manuals