FITTED EQUIPMENT
189
Step on hitch cover
Where a step on hitch cover is fitted,
customers are reminded only to stand on the
designated areas, identified with black anti-slip
matting. Stepping elsewhere on the hitch
cover may result in damage to the hitch cover.
Models without a step on hitch cover are
not suitable for standing on and failure to
follow these simple instructions may result
in premature failure or cracking which will
not be covered by any guarantees (including
extended warranties).
Cycle racks
The Swift Group allows the fitment of a two
cycle rack to our caravans and we have made
provision for fixing blocks on most models for
this purpose.
Due to the complex nature of a cycle rack,
the different models available and the need
to break into the habitation box (therefore,
having a potential of a leak), we suggest
this modification only be carried out by a
competent person, ideally, a Swift Group
dealer or Authorised Repairer.
Please be aware a cycle rack can not be fitted
onto a model where there is a rear escape
window. Please confirm this with your Swift
Group Dealer.
Caravan motor movers
The design and fitment of a caravan motor
mover shall be in accordance with the NCC
Code of Practice 305 and you should ensure
you receive a signed installation certificate of
compliance from the installer.
Failure to do so may invalidate
your warranty
STEP ON HITCH COVER / CYCLE RACK /
CARAVAN MOTOR MOVERS
To Next Page
Loading...
Need help?
General