To Next PageTo Next PageWhat to do if cooling condenser temperature is too high in my Swim & Fun 1401 Heat Pump?
If the cooling condenser temperature of your Swim & Fun Heat Pump is too high, the immediate solution is to stop the heat pump and wait for the cooling condenser temperature to decrease. Also, ensure that the temperature is within the heat pump's acceptable range.
What to do if Swim & Fun Heat Pump shows inlet water temperature sensor fault?
If the Swim & Fun Heat Pump displays an inlet water temperature sensor fault, it's likely due to the sensor being open or experiencing a short circuit. To resolve this, inspect the sensor and replace it if necessary. For further assistance, it is recommended to create a complaint, as your heat pump might require professional servicing.
General| Brand | Swim & Fun |
|---|---|
| Model | 1401 |
| Category | Heat Pump |
| Language | English |
Specifies the ideal placement for optimal heat pump operation and longevity.
Visual guide showing the heat pump's system connections and layout.
Step-by-step guide for the initial power-up and setup of the heat pump.
Explains the purpose and operation of each button on the control panel.
Details the different operational modes like Powerful, Smart, and Silent.
How to access and navigate the advanced settings menu for customization.
General guidelines for regular upkeep of the heat pump.
Essential procedures to prepare the heat pump for winter storage.
How to view and interpret error codes displayed by the heat pump.
Lists malfunctions not indicated by LED display and their corresponding solutions.
Electrical wiring diagram for reference during installation and maintenance.
Guide to connect the heat pump to the Wi-Fi network via the app.
Details the terms and conditions of the product's limited warranty.
