To Next PageTo Next Page
Need help?Do you have a question about the Swim & Fun ECO 1400 and is the answer not in the manual?
General| Brand | Swim & Fun |
|---|---|
| Model | ECO 1400 |
| Category | Heat Pump |
| Language | English |
Describes the heat exchanger material and resistance to pool water.
Notes that heat pumps are tested and ready, requiring qualified installer.
Highlights the efficient compressor and low-noise fan motor.
Mentions the control button for setting desired temperature.
Specifies optimal placement for ventilation and proximity to the pool.
Provides recommendations for water flow and bypass kit installation.
Provides a visual guide for connecting the heat pump to the pool's circulation system.
Details how to connect the heat pump using 38-32 mm hose adaptors.
Explains how to fit supplied accessories like vibration pads and drainage diverters.
Ensures adequate water flow, starting and stopping the unit.
Describes the built-in 3-minute delay to protect circuits.
Explains condensate formation, often mistaken for a leak.
Shows coolant pressure values based on ambient and water temperature.
Outlines pre-operation checks for hoses, unit stability, and power.
Explains the heat pump's display and indicator lights.
Describes how to turn the heat pump on and off using the filter pump.
Details how to adjust the desired water temperature using control buttons.
Outlines requirements for checking fluorinated greenhouse gases for leaks.
Emphasizes necessary personnel certification for handling refrigerants.
Details the requirements for maintaining records of refrigerant handling.
