To Next PageTo Next PageWhat to do if my Swim & Fun PRO 1238 shows cooling condenser temperature too high protection?
If your Swim & Fun Heat Pump displays a cooling condenser temperature too high protection message, this indicates that the cooling condenser temperature is excessively high. To resolve this, stop the heat pump and wait for the temperature of the cooling condenser to decrease.
How to fix inlet water temperature sensor fault in Swim & Fun PRO 1238 Heat Pump?
If your Swim & Fun Heat Pump displays an inlet water temperature sensor fault, it's likely because the sensor is either open or has a short circuit. The suggested solution is to check or change the sensor.
What to do if outlet water temperature sensor fault occurs in Swim & Fun PRO 1238 Heat Pump?
If you encounter an outlet water temperature sensor fault with your Swim & Fun Heat Pump, it means the sensor is either open or short-circuited. You should check or replace the sensor to fix this issue.
Why does my Swim & Fun PRO 1238 show a heating condenser sensor fault?
A heating condenser sensor fault on your Swim & Fun Heat Pump indicates that the sensor is open or has a short circuit. To resolve this, check or change the sensor.
How to troubleshoot gas return sensor fault on Swim & Fun Heat Pump?
If your Swim & Fun Heat Pump is showing a gas return sensor fault, the cause is likely that the sensor is open or has a short circuit. The suggested solution is to check or change the sensor.
What causes an ambient temperature sensor fault in a Swim & Fun PRO 1238 Heat Pump?
An ambient temperature sensor fault in your Swim & Fun Heat Pump suggests the sensor is open or has a short circuit. You should check or change the sensor.
What does condenser gas outlet sensor fault mean on Swim & Fun PRO 1238?
A condenser gas outlet sensor fault on your Swim & Fun Heat Pump means that the sensor is either open or has a short circuit. The suggested solution is to check or change the sensor.
General| Brand | Swim & Fun |
|---|---|
| Model | PRO 1238 |
| Category | Heat Pump |
| Language | English |
Details the functionality and use of the Easy pH tester for pool water.
Explains the Easy Salt system for clean bathing water via electrolysis.
Instructions for obtaining the Swim & Fun mobile application for heat pump control.
Step-by-step guide to establish Wi-Fi connectivity for the heat pump.
Navigating the app to access and manage the heat pump's timer settings.
Using the watch icon to enable or disable the timer function.
Guidance on interpreting the malfunction icon and checking for errors.
Note on password protection for factory default settings, requiring technician access.
Step-by-step instructions for performing a complete reset of the heat pump.
Essential considerations for network visibility and app access for Wi-Fi connection.
Advice on closing other apps to ensure stable Wi-Fi connection to the heat pump.
Clarifies the necessity of Wi-Fi and limitations of 4G/3G for heat pump connection.
Alternative method for Wi-Fi connection using a hotspot from a second mobile.
Information on the heat exchanger's material (PVC and titanium) and longevity.
Guidance on installation by qualified technicians for optimal performance.
Details on the efficient compressor and low-noise ventilation motor.
Explanation of the user-friendly digital control panel for temperature settings.
Criteria for selecting the optimal placement of the heat pump for ventilation.
Additional recommendations for setup, including bypass kits and condensate drainage.
Visual diagrams showing the heat pump's integration into the pool circulation system.
Methods for connecting water lines using hose adaptors or 50mm pipes.
Instructions for installing anti-vibration pads and the drainage diverter.
Functionality of the safety switch ensuring adequate water flow for operation.
Explanation of the built-in delay protecting circuits during start-up or power outages.
Essential checks to perform before powering on the heat pump for the first time.
Explains the operation of the control panel buttons and their combined functions.
Instructions for preparing the heat pump for the winter season to prevent damage.
Details the coverage period and conditions for warranty claims.
Manufacturer's disclaimers regarding liability for damages and operational loss.
Steps to follow when making a complaint or seeking technical assistance.
Diagnosing and resolving issues related to high and low pressure in the system.
Troubleshooting problems associated with insufficient water flow and overheating.
Addressing errors reported by sensors and faults within the main controller unit.
Resolving issues related to internal module boards and the power supply.
Covers issues not displayed on the LED and other specific operational problems.
Addressing cooling during heating, short operation, water drops, and ice formation.
Mandates for regular inspection and checking of equipment for refrigerant leaks.
