11. WIFI function- ‘Alsavo Pro’APP operation
11.1
operation
1. Firstly download ”Alsavo Pro” APP from App store or Google play in your smart phone.
Parameter P17=1 (WIFI function) could be auto recognition in the controller if the machine already install WIFI
PCB.
2. Open “Alsavo Pro” APP, click “+” on the upper left and select “New device”. Then Click “Next” and enter the
current WIFI password to connect. Press " " 5S on the display no matter it’s ON or OFF. Or you can press " " 5S
on the display first, then enter the current WIFi password. The display will show F1 1,F1 2, until F1 6, which means
the connect is OK.
If the connection fails, the APP will indicate “Failed to connect device”.
"Nickname and password" interface only appear one time when a new heat pump is connected successfully. You
can name and add encrypt this unit. (This interface may be missing if the wifi network is not steady. You will miss
the chance to name and encrypt it. In this case, default password “123456” is available.)
If someone’s APP is in the same WIFI network as yours, his APP could automatically identify your heat pump. And
he can operate your heat pump after inputting your password.
To Next Page
Loading...