Need help?Do you have a question about the Swiss Madison SM-1T206BQ and is the answer not in the manual?
General| Brand | Swiss Madison |
|---|---|
| Model | SM-1T206BQ |
| Type | One-Piece Toilet |
| Depth | 28.5 inches |
| Seat Height | 16.5 inches |
| Water Consumption | 1.28 GPF |
| Material | Vitreous China |
| Bowl Shape | Elongated |
| Rough-In | 12 inches |
Steps to remove the existing toilet, close the supply valve, and disconnect the supply line.
Measure the wall from behind the toilet to the middle of the closet bolt for rough-in.
Install closet bolts to the flange channel, ensuring they are 6" apart and parallel to the wall.
Invert toilet, install wax ring on waste flange with tapered end facing toilet, seal base.
Place toilet on closet flange, aligning bolts through mounting holes, loosely attach washers and nuts.
Position toilet squarely, press bowl down, alternately tighten nuts, adhere bolt covers, smooth sealant.
Insert rubber pieces into holes, place seat hardware, screw through, test position, add cover caps.
To Next Page