Need help?Do you have a question about the Swiss Madison SM-WT514 and is the answer not in the manual?
General| Bowl Shape | Elongated |
|---|---|
| Water Consumption | 1.28 GPF |
| Material | Vitreous China |
| Color | White |
| Rough-in | 12 inches |
| Flush Technology | Dual Flush |
| ADA Compliant | Yes |
| Type | One-Piece |
| Flush Type | Gravity |
| Seat Height | 16.5 inches |
Perform thorough inspection, verify plumbing codes, ensure clean and level surface before installing the toilet.
Review rough dimensions, identify suggested tools, and confirm all necessary parts are present for installation.
Drain the old toilet, disconnect supply lines, remove mounting hardware, and clean the flange area.
Measure and cut pipes according to specifications, smooth cut edges, and apply lubricant for proper connection.
Fit the bowl, ensure it's level, mark anchor points, and install anchors and brackets for secure mounting.
Secure the toilet with bolts, ensure contact with floor and wall, and apply silicone sealant around the base.
Disassemble hinge components, construct hinges by inserting screws, and attach them to the toilet bowl.
Align and tighten the seat, adjust for bowl fit, and learn how to remove and re-install the seat properly.
Understand the one-year limited warranty, including coverage, exclusions, and conditions that may void the warranty.
To Next Page