Need help?Do you have a question about the Swiss Madison SM-WC324 and is the answer not in the manual?
General| Brand | Swiss Madison |
|---|---|
| Model | SM-WC324 |
| Category | Plumbing Product |
| Language | English |
Key measurements for unit placement and wall/floor preparation.
List of required tools and materials for installation.
Secure mounting frame to studs, ensuring flush and level alignment.
Secure mounting frame to wall, ensuring flush and level alignment.
Measure and cut waste pipe to length, remove burrs, and bevel edge.
Connect waste pipe to tank outlet with grease and use dust cap.
Remove access plate to facilitate water connection to the tank.
Connect water supply hose, tighten shut-off valve and locking nut.
Flush system via shut-off valve to remove any debris before actuator installation.
Reconnect the water supply hose after the debris flushing procedure.
Reinstall actuator and cover plate, ensuring roughing box security.
Trim roughing box to size after wall material installation.
Install, mark, and cut pipe for toilet connection, ensuring proper alignment.
Insert pipe into toilet bowl and wall, ensuring the toilet is level.
To Next Page
