Swisscom Aton C30 - Storing Speed Dial Numbers

11
English
Editing numbers in the phone book
1. Press
b
to open the phone book.
2. Use
v
/
V
to browse through the phone book, or enter the
first character to quickly find an entry.
3. Press and hold
b
until the blinking cursor appears.
4. Use
v
/
V
to move the cursor, and use and the
keypad to erase and enter new data.
5. Press to confirm. The cursor will move to the second
line.
6. Repeat step 4 to edit the name/description.
7. Press to confirm. OK is displayed.
Storing speed dial numbers
1. Press and hold one of the speed dialling keys
A/B/C until a blinking cursor is shown on the first line on
the display.
2. Enter a telephone number (up to 22 digits) using the
keypad. Use
v
/
V
to move the cursor and to erase
if needed.
Use
#
to insert a pause in the number.
3. Press to confirm. A blinking cursor will be shown on
the second line on the display.
4. Enter a name (up to 9 characters) for the number to be
stored (see Keypad characters).
5. Press to confirm. OK is displayed.
6. Repeat steps 1–5 to store numbers for the other speed
dialling keys.
Deleting speed dial numbers
Speed dial numbers can not be deleted, they can only be
replaced by storing a new number.