Swisscom Aton C30 - Basic Setup; Initial Settings

3
English
Basic setup
Before using the telephone the first time, the following basic
settings should be made. After confirming a setting, the next
setting is automatically displayed. To skip to the next setting,
press .
The phone will return to standby mode after 30 seconds of
inactivity or when pressing .
On first setup the display clock will show 00:00 .
1. Press and hold
*
for about 5 seconds until the hour
flashes.
2. Use
v
/
V
to change the value and confirm with .
3. Repeat steps 1–2 to set the minutes, day and month.
ENGLISH is displayed.
Use
v
/
V
to select the desired language, then confirm with
.