Swisscom Aton C30 - Page 7

4
English
-2- CONTRAST
Use
v
/
V
to set the display contrast setting
(1–4), and confirm with .
KEYT. ON
Use
v
/
V
to set key tone ON/OFF, and confirm with .
-100- FLASH
Use
v
/
V
to set the flash key time (100/300/600 ms) and
confirm with .
The standard setting is 100 for Switzerland.
LED OFF
Use
v
/
V
to enable/disable the LED indicator for new
calls, and confirm with .
TONE
Use
v
/
V
to select either tone or pulse dialling mode, and
confirm with .
Note!
If unsure of which mode to use, select TONE as this
works in most locations.