Need help?Do you have a question about the Swisscom Powerline and is the answer not in the manual?
Plug the Powerline adapter directly into the wall power socket.
Connect the first Powerline adapter to your DSL router using the provided Ethernet cable.
Plug the second Powerline adapter to your computer or your TV-Box.
Explains the LED indicators for Ethernet connection status.
Describes LED indicators for Powerline connection quality.
Details the LED indicators for power status and energy saving mode.
Explains how to reset the Powerline adapter using the reset button.
Describes the function of the pairing button for adding adapters.
Plug the new Powerline adapter into a power socket at the desired location.
Details the steps for pairing new and existing Powerline adapters.
Connect the Ethernet cable to your device after pairing.
To Next Page
General