Need help?Do you have a question about the Swisson XMT-350 and is the answer not in the manual?
General| Type | DMX Tester |
|---|---|
| Display | LCD |
| Power Supply | Battery |
| DMX Ports | 1 |
| Connectors | 5-pin XLR |
Choose edit mode. Normal or direct.
Create and edit sequences using scenes.
Play and stop sequences, and adjust speed and fade time.
Patch fixtures to DMX addresses.
Edit fixture definitions or create new ones.
Configure power settings of the XMT, including backlight and auto-off.
Mode to perform firmware update of the XMT.
The XMT performs a full discovery when starting the RDM controller.
Displays a list of discovered RDM devices on the main screen.
To Next Page
